Importance Of Good Cut Stick

The cut-out stick is a very important accessory and is an important component for all manufacturers and paper cutters models, through a knife gap and other cutters. The cut twigs are located in the boiler slots and have been developed to store and protect the edges of the cutting blades used to cut materials. Choosing the appropriate clip can greatly improve cut production, improve cut quality, and extend the life of industrial paper knives or other industrial cutting blades like the guillotine blades. Today’s printed finishes require high performance with high-quality cutting, ultimate durability and cut sticks.

Standard-cut sticks:

These ideal cutting sticks are made of polyethylene. Polythene offers high-quality sticks to cut sticks and is one of the most flexible and cost-effective plastics compared to other thermal materials. The grade we use is high-density polyethylene, usually green or white sticks. Cutting sticks of this grade are usually used for standard grade industrial knives (inlaid, high-speed steel and carbide). We can provide accurate reflection to meet the specifications of most manufacturers, or we can cut cuttings from certain length bars or 118 inches.

Premium Cut Sticks:

This cut stick is usually grey. These cut sticks are made from strong polypropylene (suitable for applications that require high impact resistance, strength and durability) used in high volume environments.

Original cut sticks:

PVC cut (polyvinyl chloride) sticks and red colour. These are very common styles of flat stick cutting design. PVC is the main material used in the manufacture of plastic products, and PVC cut sticks are much more difficult and stronger than other thermoplastics on the market.

White Nylon Cutting Sticks:

This nylon rig stick is very compact and is particularly suitable for parking and bulk cutting. We have excellent tensile and compressed strength by cast nylon stick excellent wear resistance and very suitable for bulk-pound ring customers.

Self-calibration standards for natural blankets and cut sticks can contribute to sticking life. This means that the cutting stick remains longer in the channel/slot than many other types of cut sticks on the market today. This tough means that you don’t have to rotate the stick as often as other sticks. I have heard from customers that the stick has a long lifespan and does not need to be replaced or replaced as often as competitors.

Recall:

High cut sticks for paper cutters protect the cutting blades and provide a sharp edge for the paper pile.

Make the most of the cut stick. Most of the sticks have 8 different stick sites. You can do it 4 times through the stick to rotate 4 times and then from end to end.

The ideal cutting sticks can influence the cut quality of the bottom sheet. In this case, the cut stick can be rotated, so it must be rotated. A cut stick will require you to rotate once or twice between the knife sticks.

If thrown out, replace the 4 cut sticks. Replacement of a mitigation stick improves the cut standard. If you don’t put the knife deeply, the cut stick will reduce. You need to put the knife deeply enough to lift the paper and cut the final paper.  

shares